[MBD Logo] Creating a drawing from your design
A Pro/DESKTOP Tutorial (Module 4)		 [Completed Design]
Main Menu | Crib Sheet | Glossary Previous Page | Next Page
Page 4 of 9

Placing an end elevation
In 1st. angle orthographic projection the end elevation is on the right of the front elevation. A ‘projected view’ set up a relationship between the drawing views adding another modelling view does not do this.
  1. From the right hand tool bar choose the Select Features [Select Features icon] tool.. Highlight the vertical line that represents the back of the van and click the left mouse button.

  2. From the Drawing menu choose Add Projected View.
    An end elevation will added to the drawing.

  3. With the highlighted Select Views [Select View icon] tool hold down the key and drag the side elevation to the right.
    (Holding down the key maintains the correct alignment to the side elevation.)

Adding a plan view

[Figure 7]
Fig. 7. The three views


  1. Repeat the above procedure to add a plan view.
Main Menu | Crib Sheet | Glossary Previous Page | Next Page
© CBI, 1999 Last Updated: 13/08/98