Fig. 1 Extruded Throttle Pin


Fig. 2 Select Assembly, Centre Axes


Fig. 3 Select Assembly, Add Component, Throttle Crank.
THROTTLE PIN
  1. View onto Workplane.
  2. Select Create Circle Tool. Click, drag and release a circle based on the centre axes.
  3. Select the Constrain Size Tool and change the dimension to 5.
  4. Select Extrude Profiles Tool and enter 150,accept all other values, click OK.
  5. Select File, Save, THROTTLE PIN, save.

ASSEMBLY OF THE THROTTLE
  1. Open the Throttle Body file.
  2. Select Assembly, Add Component, Throttle Pin.
  3. Choose Select Faces and highlight the length of the Throttle Pin. Hold down the shift key and also select the axes of the pin hole located in the Throttle Body.
  4. Select Assembly, Centre Axes. The pin will move into line with the hole.
  5. Choose Select Faces and select the end face of the pin. Hold down the shift key and also select the end face of the Throttle Body.
  6. Select Assembly, Align Faces. The pin will move into the block.

ASSEMBLY OF THE CRANKS

  1. Select Assembly, Add Component, Throttle Crank.
  2. It may be necessary to choose the Select Parts Tool and click the crank. Click, hold and drag the crank to a suitable space.
  3. The Select Parts Tool can have a delay to it.

Click the part to highlight it. Then click and hold the mouse button there is a slight delay and the highlight lines blink. The part should now be free to be moved around the design.

When the mouse button is released the part is left in that position.