Fig. 1 Draw out Half profile of pedal


Fig. 2 Mirror and Extrude the Pedal

 

 

 

 


Fig. 3 Edit, Duplicate the treads

 


Fig. 4 Manipulate the underside and extrude

 

 


Fig. 5 Radius the Edges


RUDDER PEDALS
  1. View onto Workplane.
  2. Select Create Straight Line Tool.
  3. Click at (-150,50) drag and release a line at (0,80).
  4. Click at (-150,50) drag and release a line at (-150,0).
  5. Click at (0,80) drag and release a line at (-150,50).
  6. Click at (150,50) drag and release a line at (150,0). (Fig. 1)
  7. Choose Select Line and highlight the 4 lines red. Use shift key for multiple selections.
  8. Select Line, Mirror X Axes.
  9. Select Extrude Profile, set distance to 10, accept all other values, OK.
  10. Select Isometric Button, Autoscale if necessary. (Fig. 2)
  11. Choose Select Faces, highlight the top face red.
  12. Select Workplane, Plane of Object, OK.
  13. View onto Workplane.
  14. Select Create Rectangle Tool.
  15. Click at (-130,40) drag and release a box at (-120,0). Zoom in tight on the box.
  16. Select Scissors Tool and remove bottom line
  17. Double click the top line of the box, hold the mouse button and drag the line into an arc. Release when suitable radius has been achieved.
  18. Choose Select Line and highlight the 3 lines red. Use shift key for multiple selections.
  19. Select Line, Mirror X Axes.
  20. Select Edit, Duplicate, Rectangular. X Axes = 8 Y Axes = 1, Spacing = 35
  21. Select Extrude Profile, set distance to 3, accept all other values, OK. (Fig. 3)
  22. Click Isometric Button, Autoscale.
  23. Choose Select Faces, highlight the top face of each grip red.
  24. Select Round Edges Tool, set to 3, OK.
  25. View, Manipulate the pedal to the underside.
  26. Choose Select Faces, highlight the bottom face red.
  27. Select Workplane, Plane of Object, OK.
  28. View onto Workplane.
  29. Select Create Rectangle Tool.
  30. Click at (-30,20) drag and release a box at (30,-20). (Fig. 4)
  31. Select Extrude Profile, set distance to 30, accept all other values, OK.
  32. Choose Select Faces Tool and select top of new box.
  33. Select Workplane, Plane of Object, OK.
  34. View onto Workplane and Zoom in on top face.
  35. Select Create Rectangle Tool.
  36. Click, drag and release a rectangle from (-30,6) to (30, -6).
  37. Select Extrude Profile, set distance to 30, Below Workplane, Subtract Material, OK.
  38. Choose Select Edges. Highlight the top left and right corners. (4 corners) (Fig. 5)
  39. Select Round Edges, set to 30 OK.

Select File, Save, RUDDER PEDAL, save.