Fig. 1 Constrain the 2 rectangles

 

 


Fig. 2 Extrude and add Text Outline

 


Fig. 3 Extrude Text Outline


Fig. 4 Switch Bezel dimensions


FIRE WARNING DISPLAY
  1. View onto Workplane.
  2. Select Create Rectangle Tool.
  3. Click, drag and release 2 rectangles at 90 to each other.
  4. Constrain Separation of both rectangles to 100 x 50 and 200 x 50.
  5. Select Scissors Tool and remove inner line to make one outline shape (cut twice).
  6. Select Workplane, Reposition Axes and click at top left corner of shape.
  7. Select Extrude Profiles. Enter distance 30, accept all other values, click OK.
  8. Choose Select Faces and highlight the top face red.
  9. Select Workplane, Plane of Object, OK.
  10. View onto Workplane.
  11. Select Workplane, Reposition Axes and click at (10, -40).
  12. Select Line, Add Text Outlines. Type FIRE. Enter distance 25, font should be plain in this case ARIAL REGULAR Click OK.
  13. Select Create Rectangle Tool.
  14. Click, drag and release a rectangle to cover the face of the lower rectangle.
  15. Select Extrude Profiles, enter distance 10, below workplane, subtract material, OK.
  16. Select File, Save, FIRE WARNING, save.

FIRE LETTERING

  1. View onto Workplane.
  2. Repeat step 12.
  3. Select Extrude Profiles. Enter distance 10, accept all other values, click OK.
  4. Select File, Save, FIRE LETTERING, save.

SWITCH BEZEL

  1. View onto Workplane.
    2.
  2. Select Create Rectangle Tool.
  3. Click, drag and release a rectangle.
  4. Constrain Separation to a square 50 x 50.
  5. Select Extrude Profiles. Enter distance 5, accept all other values, click OK.
  6. Choose Select Faces and highlight the top face red.
  7. Select Workplane, Plane of Object, OK.
  8. View onto Workplane.
  9. Select Create Rectangle Tool.
  10. Click, drag and release a rectangle.
  11. Constrain Separation to a square 30 x 30.
  12. Select Extrude Profiles, enter distance 5, below workplane, subtract material, OK.
  13. Select Edges Tool, highlight top outer edge.
  14. Select Chamfer Tool, distance 3, OK.
  15. Select File, Save, SWITCH BEZEL, save.