The first suspension strut and telescopic pole located in the correct position. Fig. 25

The Pivot is added to the assembly and the Centre Axes feature used to centre the pivot with the locating bracket of the suspension frame. The two components are then mated by highlighting the faces as shown in Fig. 26 This permanently locates the pivot in the correct position.

NOTE: Use the Fix Component function from the Assembly Menu by highlighting the wheel and the frame. This will prevent strange component movements as the assembly is built from this stage onwards. To fix a part, highlight it and select Fix Component.

Add the Stick 2 component again and select the two faces highlighted on the left. Fig. 27

From the Assembly Menu select Centre Axes to align the two components.

The two faces indicated are now highlighted prior to mating.

From the Assembly Menu select Mate.

The second frame will now spin in spectacular fashion and be located in the correct position on the pivot.